Large Scale Solvent Recovery
The 50L EcoChyll X5 offers a turnkey solution for solvent recovery and decarboxylation which vastly outperforms traditional 50L rotary evaporators.
Available in 22L and 50L
CONFORMS TO UL STDS 61010-1 & 61010-2-011, CERTIFIED TO CSA STDS C22.2 # 61010-1 & 61010-2-011
50L EcoChyll X5 Hi-Speed Evaporator
Turnkey System Designed for: |
Large Scale Solvent Recovery and Decarboxylation |
Solvent Recovery Throughput: |
Up to 25L of ethanol per hour |
Decarboxylation Capacity: |
Yes |
Automation: |
Optional |
The 50L Ecochyll® X5 evaporator will outperform any 50 L rotary evaporator on the market while costing a fraction of what the leading brands charge. It provides industry-leading evaporation rates, huge electricity savings, reduced run times, less manual intervention, and true 50 L capacity.
The keys to our improved performance and efficiency are:
- Direct cooling of a metal condenser coil with refrigerant from the compressor. This leads to pull-down times of just minutes while using far less electricity than a recirculating chiller.
- Replacing a rotating flask with an upright, stationary flask which is stirred with an overhead stirrer and heated on a heating mantle. The direct heating of the flask is more energy efficient, the upright flask allows you to use the full 50 L volume, and the stirring is more energy efficient than rotating a large flask. This also allows us to put a drain on the evaporating flask for convenient collection of residual product – something which traditional rotary evaporators cannot do!
The EcoChyll X5 is sold as a turnkey system with on-site installation and training available. You’ll never want to use a traditional rotary evaporator again!
Ecodyst Evaporators: Friendly to Your Budget and the Planet
The 50L EcoChyll X5 does the work of two 50L rotary evaporators while costing less than one! Additionally, your operating costs will be much lower. Electricity usage will be cut by more than half, you’ll never have to buy and replace the glycol or other refrigerant for a recirculating chiller, and you’ll have fewer incidents of glass breakage and replacement since all the glassware is stationary.
EcoChyll evaporators are being used successfully in many different industries including chemicals, pharmaceuticals, cannabis, and others. If you would like to learn more about Ecodyst’s revolutionary cooling technology or the EcoChyll® product line, contact a member of the team today. Otherwise, fill out the form below to receive a quote on the EcoChyll® X5 evaporation system.
CONFORMS TO UL STDS 61010-1 & 61010-2-011, CERTIFIED TO CSA STDS C22.2 # 61010-1 & 61010-2-011
- Recovers all residual solvents (below 500ppm)
- Designed to handle an extremely wide range of solvents, including water and all common solvents used in the cannabis and hemp industries
- No need to move glassware: The stationary evaporation flask is filled with a siphon feed valve and emptied with a drain valve for uninterrupted operation
- Can be incorporated in-line with botanical extraction or winterization systems and fully automated
- Digital interfaces and data monitoring for stirring rod, vacuum pump, chiller, and heating mantle
- Patented EcoChyll condensation unit reaches -40°C on the coils in under one minute
- Spacious evaporation flask prevents “bumping” of solution into condensation unit
- Single user operation with minimal interference required
- Capable of evaporating ethanol at low temperatures (38C)
- Extremely energy efficient
- Safety features for automatic shutdown